what we measure
No "visual checks" — only documented instrumental measurements, stored for years in our archives and provided to the client as a detailed PDF report.
UPRTEK MK350S Premium
Portable spectroradiometer with ±0.0015 accuracy in CIE 1931 xy coordinates. Measures: CCT (Kelvin), CRI (Ra), R9 (saturated red rendering), DCI-P3 and Rec.2020 color gamut, flicker percentage and index.
Application: D65 white validation, LED chip binning verification, gamut certification for virtual production.
Konica Minolta CS-160
1° spot luminance meter with ±2% accuracy. Measures the real nit of the LED wall at different gray levels, luminance maps on grid (e.g. 9 points), and decay over time.
Application: declared vs measured brightness validation, uniformity mapping (banding), degradation tests.
FLIR E5 Thermal Camera
Thermal imaging with 0.10°C resolution. Reveals hot-spots on modules under stress, evaluates heat sink and ventilation efficiency, and anticipates hardware failures.
Application: thermal certification of installations, predictive failure analysis, cooling system project validation.
Fluke Power Analyzer
Measures real power consumption (W, kWh), power factor (PF), harmonics (THD), voltages, and currents. The baseline to size electrical systems and validate regulatory compliance.
Application: power distribution sizing, consumption optimization, EN61000 grid compliance verification.
when it is needed
- New system testing — validation of the specifications declared by the manufacturer before the final payment.
- Technical dispute — independent expert opinion in case of client-supplier litigation. Report admissible in legal venues.
- Preventive maintenance — periodic diagnostics for critical installations (broadcast, stadiums, DOOH).
- Compliance certification — chromatic-photometric report for broadcast, virtual production projects, and public tenders.
- Degradation analysis — repeated measurements over time to quantify the light and chromatic decay of the LEDs.
how it works
- Site survey or lab inspection — we come to you for fixed installations; individual modules or cabinets can be brought to our lab in Arzano.
- Measurement — typically 2-4 hours for LED walls up to 30m², depending on the depth required.
- Data analysis — 24-48 hours to process the measurements and generate the report.
- Signed PDF report — complete technical document: raw data, graphs, compliance with standards, recommendations.
- Follow-up — available for clarification calls or corrective actions if necessary.
want a quote for calibration?
contact us with the details of your LED wall — we will get back to you within 72h with cost and timeline.
request a quote →