Transport (round trip)
We bring the LED wall to your booth at Paris Nord Villepinte, Paris, and take it back after the show.
LED Wall Rental for Maison&Objet.
Exhibiting at Maison&Objet (Paris Nord Villepinte, Paris, France)? We bring the LED wall (or video wall) ready to your booth: transport, assembly, dismantling and on-site technical support included. The right screen for your booth at a furniture and decoration show, indoor and outdoor, turnkey — from a vertical totem to a large backdrop.
You handle the booth. We handle the screen.
Assembly & dismantling
Precision setup within the exhibition centre schedule, dismantling at the end of the event.
On-site support
A technician on call or on site for the whole show: a failure mid-fair is not something a call centre can fix.
Processor & calibration
Novastar video processor and calibration kept show after show: the wall is ready to receive your signal.
Audio & operator (opt.)
Sound system and on-site video engineer on request, up to full-time content operation.
Content (opt.)
In-house production of motion graphics, video and live content, cut to the exact screen format.
Preparing the stand? Our guide what decides whether a LED wall works at a trade show (in Italian) sets out the four things that are discovered late — the power the organiser assigns you, the weight and how the wall stands, the distance at which people actually pass, the build-up window — with the figures we use when we prepare a quote. The same figures, applied to Maison&Objet, are in the sections below.
The venue: Paris Nord Villepinte, Paris
Maison&Objet takes place at Paris Nord Villepinte, ZAC Paris Nord 2, Villepinte, Paris, France. For an exhibitor coming from Italy the question is rarely the screen: it is whether the screen, the structure and the people arrive together. For Maison&Objet they do: the LED wall leaves from our base near Naples with our own team and vehicles, and the same technicians who load it in Italy assemble it at your booth in Paris.
The venue sets the timetable, not us. Access to Paris Nord Villepinte for lorries, the halls' build-up hours and the dismantling sequence of Maison&Objet are fixed by the organiser weeks in advance, and the route from Italy to Paris is planned around them so that the wall is at the booth when your stand builder has finished the walls — not before, when there is nowhere to put it, and not after, when the access is closed.
Paris Nord Villepinte is not a venue we visit every month, and we say so: for Maison&Objet we ask the organiser's technical office for the hall regulations in advance, and we put the answers — vehicle access, hall build-up hours, rigging rules — in the quote rather than in a phone call the week before.
What the screen has to do at a furniture and decoration show
Maison&Objet is a trade show for furniture and decoration. That changes what the screen at your booth has to do, and therefore which screen we bring to Paris.
At a design, furniture or interiors show the screen competes with objects that were chosen for how they look. A wall that is too bright, too blue or too coarse cheapens the products next to it; at Maison&Objet we set it to hall light, calibrate it to a neutral white and pick a pitch — typically P2.6 — that disappears at the distance a visitor actually stands.
Many exhibitors at Maison&Objet use the wall for architectural imagery, material textures and slow-moving renders rather than adverts. Those contents are unforgiving of colour shift between cabinets, so the calibration we maintain show after show is not a detail here: it is the reason the wall looks like one surface.
Build-up and dismantling at Maison&Objet
Maison&Objet does not have a fixed edition date in our calendar, so we do not print one: tell us the dates of the edition you are exhibiting at and the quote is built on them. Exhibition centres open the halls to stand builders in the days before the opening — usually the two days before — and the LED wall goes up once your stand's walls are finished, inside the window assigned to your hall.
Dismantling starts as soon as Maison&Objet closes, often the same evening, with every exhibitor in the hall packing at once. For a booth-sized wall the work itself is a matter of hours. If the closing is late and the halls do not allow dismantling that night, the wall stays at the stand and must be kept in custody until our team collects it the next morning — the quote says which of the two applies.
For Maison&Objet we recommend booking at least three to four weeks ahead, which is the time it takes to reserve the hardware and plan the logistics around the venue's rules. Short-notice requests are not refused: they are answered with what is actually available.
Power, weight and depth at your booth in Paris
Three numbers decide whether a LED wall works at Maison&Objet, and none of them is on the screen's data sheet. The first is power. Our standard fair panel draws about 494 W per square metre at full white: a 3 m² wall is around 1.5 kW, a 6 m² wall around 3 kW — the whole of the single-phase 16 A socket (about 3.6 kW) that most exhibitors order with the stand — and a 10 m² wall, at roughly 4.9 kW, needs a 32 A supply or a dedicated line. That is the peak, not the average, but a circuit breaker trips on the peak. Send us the wall size before you close the electrical order for Maison&Objet and we tell you what to book.
The second is weight and support. A fair wall weighs between 18 and 30 kg per square metre depending on the series, plus the structure that holds it — well within what any hall floor at Paris Nord Villepinte carries, so at Maison&Objet the floor is not the question. The constraint is how it stands: a ground-support structure inside the stand needs around 40 cm of depth behind the screen for frame and cabling, while hanging from the hall roof depends on the venue, has a rigging cost and must be requested from the organiser weeks in advance. Ask your stand builder how much depth is behind the screen before the floor plan is signed.
The third is distance. A millimetre of pixel pitch wants roughly a metre of viewing distance before the dots show; in a booth at Maison&Objet a visitor is often at two metres or less, which is why we bring fine-pitch panels as a rule and choose a wider pitch only when the screen sits high above the stand or faces the aisle from a distance. We rent from 6 m² upwards, in cabinet multiples, and we carry about ten per cent of the cabinets as spares.
A failure mid-show can't be fixed by a call centre.
A tempting price often hides poor technical skill. We come in person, with spare parts and instruments: our lab repairs down to the single LED and is equipped to intervene on site. We don't leave you a toll-free number — we leave you a technician.
discover the lab →Three packages. Pick how relaxed you want to be.
Indicative prices for a standard indoor event. The actual quote depends on surface, duration and distance: we calculate it on your booth at Maison&Objet.
Ready for Maison&Objet?
Tell us booth, hall and dates: we'll send a tailored quote within 24 hours.
get in touch →How much does it cost to rent a LED wall for Maison&Objet?
It depends on booth size, duration and service level. For a standard indoor event, packages start from around €4,490 + VAT (Silver, including transport, assembly and support). For Maison&Objet we prepare a tailored quote within 24h — get in touch and we'll get back to you.
Do you deliver and assemble directly at the booth in Paris?
Yes. We coordinate with the schedule and rules of the Paris (France) exhibition centre: delivery, assembly, dismantling and collection are included. You focus on the booth, we take care of the screen.
How far in advance should I book?
For trade fairs we recommend at least 3–4 weeks to secure hardware and logistics. For urgent requests, contact us anyway: we often cover short notice too.
What LED wall sizes are available?
We rent from 6 m² upwards, modular to fit your booth width and height — from a vertical totem to a large backdrop, indoor and outdoor. Not sure about the size? We advise you.
LED wall rental at other trade shows
- Eurexpo LyonEurexpo Lyon · Lyon, France — same area
- LineapelleFiera Milano Rho · Milan (Rho) — A–Z, previous
- Maker Faire RomeFiera Roma · Rome — A–Z, next